BPS Access Solutions Unique Concertina Review UK 2026
Quick verdict
Score: 8.9/10
Best for: Small or awkward loft hatches with limited space above
Not for: Openings it isn't sized for - measure your hatch and ceiling height first
Bottom line: A practical loft ladder (concertina, 2.74m reach) for safer loft access.
This review finds that the BPS Access Solutions Unique 2.74 m (9 ft) (10 tread) concertina loft ladder is best suited to homes needing a compact loft access option. It is designed as a concertina ladder with a 2.74 m reach, which helps reduce the storage footprint compared with longer extension-style routes. This loft ladder review UK positioning suits situations where loft access requires a compact route rather than a long extension, although a higher reach would be needed if 2.74 m is not sufficient. Not stated.
Key specifications
| Spec | Value |
|---|---|
| Reach | 2.74 m |
| Treads | 10 |
Pros
- Concertina loft ladder
- 2.74m reach
- Non-slip treads
- Folds away neatly into the loft opening
Cons
- Measure your hatch aperture and ceiling height before ordering
- Needs secure fixing into sound joists - get a joiner if unsure
- Never exceed the stated maximum load, including what you carry
Type and Mechanism
A concertina loft ladder is made to fold in sections so it can fit into a compact loft opening while still providing a usable step-by-step climbing route. The BPS Access Solutions' concertina type uses hinged segments that collapse together and extend upward when opened, forming a continuous ascent. This mechanism reduces stored bulk, which is useful where access space is limited. A folding multi-section design typically needs careful alignment during deployment so the treads sit evenly. Before climbing, ensure each section locks properly, then maintain steady hand placement.
Reach and Hatch Size
With a stated reach of 2.74 m (9 ft), The loft ladder' unique concertina loft ladder is designed for users who need access to a loft positioned roughly within that height range from the ladder's base to the top landing point. When choosing a ladder for a specific ceiling, measure from the floor surface where the base rests to the loft entry level. The product title indicates a 10 tread configuration, which typically means a longer travel up than very short ladders.
Build and Weight Limit
Build and weight limits matter for loft ladders because the ladder must hold its own structure while supporting the person using it, and because higher loads can increase wear on treads and joints over time. For the BPS Access Solutions.74m (9') (10 tread) concertina model, the compact folding design means hinges and sections flex repeatedly while staying stable. The ladder has rubber-coated non-slip treads, which can help reduce slip risk, although grip can reduce when treads are dirty. Buyers should confirm the official maximum user and load limits.
Fitting and Use
Proper fitting and careful use are important for any loft concertina ladder, and the loft ladder.74m (9') (10 Tread) model should be installed so it reaches the intended loft opening height and stands stable when opened. Before fixing, the installer checks that the ladder sits square to the opening and that the loft hatch clears fully. The ladder must be extended gently, held until each tread locks in place, and then used one tread at a time with steady hand support. If the ladder feels loose or misaligned, installation is stopped, the mounting is re-checked, and alignment is adjusted.
Who Is This For?
Who is this ladder for, and who should look elsewhere? The BPS Access Solutions Unique 2.74 m (9') (10 Tread) Concertina Loft Ladder suits people who need compact loft access where space is limited around the opening. The 2.74 m reach fits common loft heights, and the 10 tread layout provides a stable climbing sequence. The steps are rubber coated for grip, which suits households looking for straightforward, secure footing. Those with taller ceilings, or who require a different reach, should look elsewhere.
Where to Buy in the UK
Finding where to buy the BPS Access Solutions.74m (9') (10 Tread) Concertina loft ladder in the UK is usually easiest via specialist access equipment sellers, since The loft ladder focuses on concertina and sliding loft ladders. Shoppers typically check loft ladder retailers and online marketplaces, then confirm the concertina design, the 2.74m reach, and the 10 treads. Listings should also be checked for delivery details and any included fitting guidance or parts, as these elements are not always stated alongside the ladder model name. Comparing listings helps avoid mismatched lengths when product names are similar, especially where reach and tread count are specified separately.
Frequently Asked Questions
Is the BPS Access Solutions worth it?
For getting safely and easily into a loft, the loft ladder (a concertina loft ladder) does the job. The right choice depends most on your hatch size, your floor-to-ceiling height and how often you go up. Measure both before you buy, as a ladder that doesn't fit your opening is the most common and most expensive mistake here.
What type of loft ladder is this loft ladder?
The BPS Access Solutions is a concertina loft ladder. These fold up like a scissor mechanism into a very compact stack, so they suit small or awkward hatches and lofts with limited swing space above. They're quick to pull down and take up the least room, though they can feel less rigid underfoot than a sliding aluminium ladder.
How far does the BPS Access Solutions Unique 2 extend?
The loft ladder has a 2.74m reach. That figure needs to match your floor-to-ceiling height, not just roughly - measure from your floor to the underside of the loft opening before ordering. A ladder that's too short is unsafe, and one that's too long won't sit correctly at the right climbing angle. If you're between sizes, check the manufacturer's stated minimum and maximum ceiling height.
Is this loft ladder easy to fit?
Fitting varies by type. Telescopic ladders need no installation at all - you simply position and extend them. Sliding, concertina and timber folding ladders fix permanently to the loft opening and need secure fixing into sound timber joists or a properly constructed frame, which is where most DIY fittings go wrong. If you're unsure the surrounding structure is sound, or the hatch needs enlarging, get a joiner to fit it - a ladder is only as safe as what it's screwed to.